The Blox from Lenox Laser E-Mail me here

What makes these Blox so useful is they can accommodate any configuration and can be reused for rapid prototyping and easy configuration on the holographic table. I simply took the Blox off my static mounts and adapted them to the new configuration. You can see how they were used in my Old Lab and New Lab photos.

 

Click to enlarge

These are the non standard (not 1/2 inch) poles provided with these magnetic mounts. The Blox allows simply integration without any machining to interface the non standard pole with my gimbals and optic mounts.

Here I simply glued a couple of Blox on the mirror and I have full adjustablilty in the up and down position.

Here I glued a couple of Blox to the mirror and with some simple arrangement am allows to provide tilt with this collimator for overhead reference beam. I just loosen the set screw visiable and the mirror can tilt.

Here is a side view of the overhead collimator with the Blox.